![]() The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. ![]() Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below). ![]() during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.įully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, and battery overheating - monitored via the internal temperature sensor. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This 10A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring. ![]() In this way it maintains battery health and extends its life.His Victron 75V 10A MPPT controller comes from the intelligent BlueSolarrange, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. Beside that, BlueSolar will attempt a 100% recharge every day. The voltage at which BlueSolar disconnects a load can be configured. The intelligent load output function prevent battery over-discharge. If installation is connected to the internet, Victron Remote Management Portal provides access to the full power of your MPPT anytime and anywhere even when there is no internet connection or phone signal nearby MPPT can be monitored by bluetooth-pairing with a long-range wide area network (LoRaWAN) - optionally available device. The advantage of this is most noticeable when the sky is partially clouded or light intensity is changing. By constantly monitoring the voltage and current output of solar panels, this MPPT technology ensures that every drop of available power is collected from panels and stored in batteries. Victron BlueSolar enables ultra fast maximum power point tracking. Using the latest technology, BlueSolar charge controllers maximise energy harvest, driving it intelligently to achieve full charge in the shortest possible time. Victron BlueSolar MPPT 75/15 charge controller
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |